Specifications

OmniAccess Reference: AOS-W System Reference
38 Part 031652-00 May 2005
Click Apply and the AM Modeling page displays.
AM Modeling Page
The AM Modeling page allows you to specify all the information necessary for
RF Plan to determine the appropriate placement of your AMs.
Controls on this page allow you to select or control the following functions:
Design Models
Two radio buttons on the page allow you to control the kind of model which
will be used to determine the number and type of APs.
Design Model Radio Button Options:
z Monitor Rate Use this pull-down menu to specify the desired monitor
rate for your Air Monitors.
z AMs Use this field to manually specify the number of Air
Monitors to deploy (Custom Model only).
z Design Model Use these radio buttons to specify a design model to
use in the placement of Air Monitors.
z Coverage Use this option to let RF Plan automatically determine
the number of AMs based on desired monitor rates and
the configuration of your building.
Desired rate is selectable from 1 to 54 Mbps in the
Coverage model.
z Custom Use this option to simply specify a fixed number of
AMs. When the AM Plan portion of RF Plan is executed,
RF Plan will make an even distribution of the AMs.