Specifications

OmniAccess Reference: AOS-W System Reference
36 Part 031652-00 May 2005
AP Modeling Page
The AP Modeling page allows you to specify all the information necessary for
RF Plan to determine the appropriate placement of your APs.
Controls on this page allow you to select or control the following functions:
z Radio Type Use this pull-down menu to specify the radio type in the
appropriate combination of a, b, and or g configuration.
z AP Type Specify AP 52 or AP 60.
z Coverage Use this option to let RF Plan automatically determine
the number of APs based on desired data rates and the
configuration of your building. The desired rate is
selectable from 1 to 54 Mbps in both the Coverage and
Capacity models.
z Capacity Use this option to let RF Plan determine the number of
APs based upon the total number of users, ratio of users
to APs, and desired data rates. The desired rate is
selectable from 1 to 54 Mbps in both the Coverage and
Capacity models.
z Custom Use this option to simply specify a fixed number of APs.
z Overlap Factor Use this field and pull-down to specify an overlap factor.
z Rates Use these pull-down to specify the data rates desired on
your Access Points.
z Users/AP Selectable for Capacity or Custom models.
z APs Selectable for Capacity or Custom models.