Specifications

OmniAccess Reference: AOS-W System Reference
552 Part 031652-00 May 2005
z Calibrate the Radio Network—See “Calibration” on page 289.
z Program Access Points—See “AP Reprovisioning” on page 478.
z Reboot Access Points—See below.
z WMS Database—See below.
Rebooting Access Points
To reboot an Access Point, go to Maintenance > Wireless LAN > Reboot AP.
Click the Access Point(s) you want to reboot, and click
Reboot. To find an AP,
click Search and enter any information you have (such as location, IP or MAC
address). To organize the display to make finding APs easier, you can sort
(ascending or descending) on location, IP and MAC address.
The display is limited to ten APs per page. Use the page navigator to scroll
through the listings of APs controlled by this switch.
Managing the WMS Database
You can import a new WMS database, export this one, clean, or re-initialize it.
Information on cleaning and re-initializing TBC.
Exporting a WMS Database
TBC