Specifications

RF Design 35
Chapter 4
A Word About Building Dimensions
The dimensions you specify for building width and height should be the major
dimensions (maximum height and width) of the overall footprint of the
building as illustrated below.
When height and width are specified, RF Plan creates a rectangular area in the
Planning feature pages that represent the overall area covered by the building.
You will need to import an appropriate background image (see, “Floor Editor
Page” on page 44.) to aid you in defining areas that don’t require coverage or
areas in which you do not wish to deploy Access Points and Air Monitors
(see,“Area Editor Page” on page 45).
Define your first building on this campus and click
Apply. The AM Modeling
page displays.
z Floors Enter the number of floors in your building here.
The valid range for this field is any integer from 1 to a
value corresponding to .
z Units Specify the units of measurement for the dimensions
you specified on the page. The choices are feet and
meters.
1
12
×10
Maximum Width
Maximum Height