Specifications

OmniAccess Reference: AOS-W System Reference
546 Part 031652-00 May 2005
When ready to revert to the original, factory configuration, click Continue and
follow any prompts.
From the CLI, enter:
write erase all
reload
Make sure you do this from the serial console as this removes all IP and port
configurations. The switch will reboot and display the Setup Dialog.
Synchronize
This feature is only valid in redundant Master-Master configurations.
To synchronize the database with the other master, use the M
aintenance >
Switch > Synchronize Database
option and click Sync.
The system will prompt you to confirm that you want to synchronize the
database.
Boot Parameters
The boot parameters are the name of the boot file and its boot partition
location. Access these parameters by accessing Maintenance > Switch > Boot
Parameters
.