Specifications

Switch Maintenance 545
Chapter 24
To save any changes to the current switch configuration, click
Yes. To leave
the configuration file unchanged, click No.
To proceed with the switch reboot, click
Continue and follow any prompts.
Reboot Peer Supervisor Card
The Maintenance > Switch > Reboot Peer Supervisor Card option requires an
Alcatel Wireless LAN switch with a supervisor card installed.
Clear Config
To reset the switch configuration to factory default settings, use the
Maintenance > Switch > Clear Config option.
The current configuration is erased and the factory default configuration is set
as the boot configuration. This option forces the switch to reboot using the
factory default configuration. (The persistent state data maintained in the
switch is preserved.)