Specifications

OmniAccess Reference: AOS-W System Reference
544 Part 031652-00 May 2005
Image management options are.
Reboot Switch
To reboot the switch, typically after an image update, click Maintenance > Switch
> Reboot Switch
.
Upgrade using Specify how you are going to copy an
image onto the server. Both TFTP and FTP
are supported.
Server IP Address Specify the IP address of the TFTP or FTP
server which contains the image to
download onto the switch.
Image File Name Enter the name of the image file.
Partition to Upgrade You can copy the image into Partition 0 or
1. Specify the location here.
Boot Partition Specify which partition the switch will use
when it reboots.
Reboot Switch After
Upgrade
To use the new image once it has been
downloaded, specify
Yes to reboot the
switch. To keep using the current boot
image, click No.
Save Current
Configuration Before
Reboot
Click
Yes to write the current configuration
to file so changes will not be lost upon
reboot. Click No to leave the configuration
file unchanged.