Specifications

OmniAccess Reference: AOS-W System Reference
34 Part 031652-00 May 2005
Building Specification Page
The Building Specification Page enables you to specify the identity of your
building and its dimensions.
Enter the appropriate values in the text boxes in the Dimension window.
z Building ID This consists of two decimal numbers separated by a
dot. The first is the campus ID. The campus ID will
always be “1” if there is only one campus. The second is
the building number.
The valid range for these fields is any integer from 1 to
255.
z Building Name Enter a user friendly name for the building.
The Building Name may be an alpha-numeric string up to
64 characters in length.
z Width and
Height
Enter the rectangular exterior dimensions of the
building.
The valid range for this field is any integer from 1 to a
value corresponding to .
z Inter-floor
Height
This is the distance between floor surfaces in the
building.
The valid range for this field is any integer from 1 to a
value corresponding to .
NOTE—This is NOT the distance from floor to ceiling. Some
buildings have a large space between the interior ceilings
and the floor above.
1
12
×10
1
12
×10