Specifications

VPN Configuration 527
Chapter 23
Common Dialer Messages:
Interface is down or no route
There is a basic wireless connectivity problem.
Route to destination is not wireless
The laptop is connected through a wired link. Uncheck Wait for Wireless if
that’s how you want to connect, or disconnect the wire.
No Alcatel switches detected…will retry
The laptop cannot automatically detect the presence of an Alcatel switch.
Uncheck Wait for Wireless if you think this is an error.
Wired. Wireless disabled…will retry
Only when wirednowifi is enabled.
Verifications:
Use the following commands to verify functionality:
(Alcatel6000) (config) #show aaa vpn-authentication
Mode = Enabled
Default Role = 'employee'
Dialer download location = /auth/dialer.html
Auth Server List
----------------
Pri Name Type Status Inservice Applied
--- ---- ---- ------ --------- -------
1 ias RADIUS Enabled Yes 3 Å IMPORTANT LINE
(Alcatel6000) (config) #show aaa captive-portal
Default role .................. employee
Guest logon ................... Disabled
User logon .................... Enabled
Auto redirect delay ........... 10 seconds
Welcome page location ......... /auth/welcome.html
Logout popup window ........... Enabled
Authentication protocol ....... https
Logon page Theme .................... default1
Logon wait range ............. 5-10 seconds