Specifications

OmniAccess Reference: AOS-W System Reference
524 Part 031652-00 May 2005
(Alcatel6000) (config-vpdn-l2tp) # ppp authentication PAP
(Alcatel6000) (config-vpdn-l2tp) # no ppp authentication mschapv2
(Alcatel6000) (config-vpdn-l2tp) # client configuration dns 10.1.1.2
(Alcatel6000) (config-vpdn-l2tp) # client configuration wins 10.1.1.2
(Alcatel6000) (config-vpdn-l2tp) # exit
4. Set up VPN Dialer and Roles for Users
Set up the dialer. The name will display on the client’s machine, so choose
something appropriate - spaces are not allowed.
(Alcatel6000) (config) # vpn-dialer Default-dialer
(Alcatel6000) (config-vpn-dialer) # ike authentication pre-share
f00xYz123BcA
For RSA SecurID only enter:
(Alcatel6000) (config-vpn-dialer) # ppp authentication CACHE-SECURID
(only for SecurID)
(Alcatel6000) (config) #
exit
Set up a role (here the role is called employee) for VPN and the captive portal:
(Alcatel6000) (config) # user-role employee
(Alcatel6000) (config-role) # dialer Default-dialer
(Alcatel6000) (config-role) # session-acl allowall
(Alcatel6000) (config-role) #
exit
Apply roles to the VPN and captive portal:
(Alcatel6000) (config) # aaa vpn-authentication default-role employee
(Alcatel6000) (config) # aaa captive-portal default-role employee
5.Set Up the Client (All steps are on client laptop.)
To set up the client:
1. Make sure that wireless connectivity is available (ping the switch IP).
2. Quit VPN dialer if there’s already one running.
3. Open browser, user should be redirected to switch’s captive portal which
should look like this, if user is not for whatever reason, type URL:
https://switchip/auth/index.html