Specifications

RF Design 29
Chapter 4
Navigation
The RF Plan tool is a wizard in that it logically guides you through the process
of defining radio coverage for all the buildings on your campus. The left pane
of the wizard screens shows the progression you follow each time you click
Apply. The button on the top, right corner also takes you to the next logical
step. You can also click the link on the left pane to go to any screen in the
wizard.
Regardless of your current location, you can always return to the opening
window by clicking Plan on the menu bar.
Applying and Saving
When you edit information on any of the RF Plan pages you need to apply that
information before it is effective. However, applying the information doesn’t
save it to your hard drive. You must click on the Save button to permanently
save the information.
The following buttons are generally available on configuration pages.
z Apply–Accept all configuration changes made on the current page (does
not save changes).
z Save–Save all applied configuration changes made since during this config-
uration session to a database file. Unsaved configuration changes will be
lost when the RF Plan tool is exited.
NOTE—Always Apply. If you advance to the next step without clicking on the
Apply button the information will be lost.
Next Step Button
RF Plan will sequence you through all the pages as you setup your Wireless
LAN. When you have finished entering the information for each page, click
Next Step located in the upper right-hand portion of the page.