Specifications

OmniAccess Reference: AOS-W System Reference
26 Part 031652-00 May 2005
tings for each AP. Real-time calibration can be automatically
programmed or manually undertaken at any time in order to
quickly adapt to changes in the wireless environment.
Getting Started
The RF Plan application is available on the Alcatel Wireless LAN switch or as a
standalone Windows application. This chapter describes the functionality for
both versions of RF Plan. Where there are differences in how the two
difference versions are used, they are noted.
System Requirements for Standalone RF Plan
The standalone Alcatel RF Plan application requires:
z Windows 2000 or Windows XP
z Microsoft Internet Explorer 6.0 or later
1
z Macromedia Flash 6.0 or later plug-in for Internet Explorer
z Intel Pentium® III 800Mhz (min) or equivalent
z 128MB RAM
z 10MB available hard drive space
Installing RF Plan
To install RF Plan, follow the three steps below:
NOTE—RF Plan only runs on Windows 2000 and WindowsXP.
1. Locate the file named Alcatel RF Plan.zip.
2. Unzip the file.
3. Launch setup.exe.
By default, the installer places the files in C:\Program Files\Alcatel RF Plan
directory. To install the application in a different directory, specify the
appropriate location.
1.Other browsers may work with AOS-W but with limited capability and are therefore unsupported.