Specifications

Access Point Setup 457
Chapter 21
Attributes in the various profiles are treated individually. Only the attributes
which are specifically configured in one profile will override the more generic
profiles. For example:
The highlighted attributes override those in the other profiles.
Also, when an attribute in a more specific profile is cleared (see the no
command on page 460), the result configuration uses value from the next
more generic profile. For example, if the max-clients value in the AP 1.2.1
profile above is cleared (no max-clients), the base profile value would be used—
not the system default.
System Default
Base 0.0.0
Profile
AP 1.2.1
Profile
Result AP 1.2.1
Configuration
ageout 1000 ageout 1000
ap-enable enable ap-enable enable
beacon-period 100
beacon-period
300
beacon-period 300
dtim-period 2
dtim-period 0 dtim-period 0
essid (blank)
essid lab1b essid lab1b
max-clients 0 max-clients 30
max-clients 15 max-clients 15
max-retries 3 max-retries 3
mode ap-mode mode ap-mode
opmode
opensystem
opmode opensystem
power-mgmt enable power-mgmt enable
rts-threshhold 2333 rts-threshhold 2333
short-preamble
enable
short-preamble
enable
tx-power 2 tx-power 2
phy-type a:
channel 36
rates
6,9,12,18,24,36,48,5
4
phy-type a:
channel 36
rates
6,9,12,18,24,36,48,5
4
phy-type g:
channel 1
rates 1,2,5,11
phy-type g:
channel 1
rates 1,2,5,11