Specifications

Access Point Setup 447
Chapter 21
AP Configuration Examples
Factory Default Values
By default, the environmental variables are as follows:
N
OTE—Variables not listed have no effect on this configuration.
With these settings:
z DHCP is used to obtain the APs IP address.
z DNS is used to resolve Alcatel-master for the OmniAccess 6000 IP
address.
bootfile This is the file name of the AP image.
Default = sap.bin
ethaddr This is the MAC address of the Ethernet interface in the AP.
This is unique for each AP.
stderr Default = serial
stdin Default = serial
stdout Default = serial
apboot> printenv
bootcmd=localflash
a
bootdelay=2
baudrate=9600
servername=Alcatel-master
bootfile=sap.bin
autostart=yes
ethaddr=00:30:f1:71:d6:1d
stdin=serial
stdout=serial
stderr=serial
Environment size: 165/131068 bytes
apboot>
a.As of AOS-W 2.2.1, after an Access Point loads a local image, it will compare that image
with the booted image. It the images differ, the AP will attempt to download the latest image
using FTP. If FTP fails, the AP will attempt to download the latest image using TFTP.
T
ABLE 21-3 Preset Environment Variables
Variable Description