Specifications

OmniAccess Reference: AOS-W System Reference
444 Part 031652-00 May 2005
Advanced AP Configuration
The following sections cover the following:
z How to access the Alcatel AP configuration prompt
z Commands and settings that can be configured
z Example configurations for common scenarios
APBoot Commands
The following commands are available from the apboot prompt:
z help
List the available commands and a brief explanation of each.
z printenv
List the environment variables and their current settings. The environmental
variables represent the APs configurable parameters See page 445 for a list of
variables.
z setenv <environmental variable> [<new value>]
Set the specified environmental variable to a new value. This is used for
changing the AP configuration. If the value is omitted, the variable is reset to its
default value. See page 445 for a list of configurable variables.
z saveenv
Save the environment variables to persistent storage. Make sure to save
configuration changes before rebooting the AP.
z boot
Boot the AP using the currently saved environmental variables. Any unsaved
changes to the variables will be lost.
z ping <IP address>
Ping the specified IP address. This is useful for testing network access.
z reset
Restart the AP. This is similar to cycling the power on the AP.