Specifications

OmniAccess Reference: AOS-W System Reference

434 Part 031652-00 May 2005

If you prefer to manually generate the location data, record the location you set

for each access point and air monitor along with the following:

Verify the configuration settings targeted for the APs.

Use the following command to examine the settings which will be used for

provisioning:

Any items listed as NA are blank and will erase the corresponding item from

the AP when provisioning is executed. Make any necessary changes to the

settings before proceeding.

Device Descrip-

tion

Note the intended function of the device (access point

or dedicated air monitor) and a brief description of its

service location.

X, Y Coordi-

nates

For each access point and air monitor, measure its X

and Y position (in feet) relative to the bottom-left corner

of the building plan as seen from overhead. For exam-

ple:

Use the same fixed point and orientation for all floors in

a building.

(Alcatel) (program-ap) #

show ap-params

0,0 126

418 ft.

262 ft.