Specifications
OmniAccess Reference: AOS-W System Reference
406 Part 031652-00 May 2005
Modify the Captive Portal ACL
A default captiveportal ACL is already configured to allow captive portal
authentication traffic. You can view the rules in the captive portal ACL as
follows:
Normally, the captive portal ACL need not be modified. However, you can add
rules to ACL the if necessary:
You can remove rules using the no form of the same command:
(Alcatel) # show ip access-list captiveportal
ip access-list session captiveportal
captiveportal
-------------
Priority Source Destination Service Action Opcode Log Queue
-------- ------ ----------- ------- ------ ------ --- -----
1 user mswitch svc-https permit Low
2 user any svc-http dst-nat 8080 Low
3 user any svc-https dst-nat 8081 Low
(Alcatel) # configure terminal
Enter Configuration commands, one per line. End with CTRL/Z
(Alcatel) (config) # ip access-list session captiveportal
(Alcatel) (config-sess-captiveportal) #
<source>
<destination>
<service>
<action>
(Alcatel) (config-sess-captiveportal) # no
<source>
<destination>
<service>
<action>