Specifications

Firewall Configuration 383
Chapter 18
Enter a name in the Service Name text field.
Check the appropriate Protocol radio button.
Enter the Starting Port.
Enter the End Port (If this service uses only a single port, enter
the starting port number here).
Click Apply and Save Configuration
Defining Source and Destination Aliases
Source and destination aliases may be configured in Web UI.
Source and destination aliases apply to specific IP addresses or groups of IP
addresses. The alias is a convenient method to identify these addresses in
easily readable way. They are used with traffic policies to specify the source
or destination of a packet.
Navigate to the Configuration > Security > Advanced > Destinations page.
Protocol Specify the protocol, either by using the
radio buttons or by entering the protocol
number (0 - 255).
Starting Port Sets the lower port number of a protocol
port range.
End Port Sets the upper port number of a protocol
port range.
N
OTE—If the service uses a single port,
enter the starting port number here also.
1
2
3
4
5