Specifications

OmniAccess Reference: AOS-W System Reference
350 Part 031652-00 May 2005
The configured RADIUS server settings may be viewed using the show aaa
radius-server server-name <name> command.
Server Rules
Define server rules for deriving roles or VLANS using the aaa derivation-rules
command from the CLI.
Enter the server-rule sub-mode using the aaa derivation-rules <ServerName>
command.
Define the rules using the form
set [role|vlan] condition <Attribute> <CONDITIONAL> <value> set-value [RoleName|VLAN]
Conditionals:
z contains
z ends-with
z equals
z not-equals
z starts-with
z value-of
You may view the rule you create using the show aaa derivation-rules
command from the CLI.
(Alcatel) (config) #aaa derivation-rules server rad2-radius-server
(Alcatel) (server-rule) #
(Alcatel) (server-rule) #set role condition User-Name contains foo
set-value foo-user
(Alcatel) (config) #show aaa derivation-rules server
rad2-radius-server
Server Rule Table
-----------------
Priority Attribute Operation Operand Action Value Total Hits New Hits
-------- --------- --------- ------- ------ ----- ---------- -------
1 User-Name contains foo set role foo-user 0 0