Specifications

Authentication Server Configuration 349
Chapter 16
Configuring General AAA Settings Using the CLI
Configure the general AAA settings using the aaa timers com-
mand
View the general authentication server settings using the show
aaa timers command.
Configuring RADIUS Servers Using the CLI
Configure RADIUS servers using the aaa radius-server com-
mand.
(Alcatel) (config) #aaa timers idle-timeout 5
(Alcatel) (config) #aaa timers dead-time 10
(Alcatel) (config) #show aaa timers
User idle timeout = 5 minutes
Auth Server dead time = 10 minutes
(Alcatel) (config) #aaa radius-server rad2-radius-server
(Alcatel) (config) #aaa radius-server rad2-radius-server host
192.168.200.2
(Alcatel) (config) #aaa radius-server rad2-radius-server authport
1812
(Alcatel) (config) #aaa radius-server rad2-radius-server acctport
1813
(Alcatel) (config) #aaa radius-server rad2-radius-server key
AbCdE12345
(Alcatel) (config) #aaa radius-server rad2-radius-server retransmit 3
(Alcatel) (config) #aaa radius-server rad2-radius-server timeout 5
(Alcatel) (config) #aaa radius-server rad2-radius-server mode
"enable"