Specifications

OmniAccess Reference: AOS-W System Reference
344 Part 031652-00 May 2005
Configuring MAC Address Role Mapping with
Web UI
MAC Address role mapping provides identification and role mapping based on
the Client MAC Address. This feature should not be considered an
authentication method because no secure password is employed. This feature
should ALWAYS be combined with L2 encryption and appropriate firewall
policies.
Configure MAC Address Role Mapping by navigating to the Configuration >
Security > Authentication Methods > MAC Address
page.
The following options and parameters may be configured with Web UI.
Authentication Enabled Check or uncheck this box to enable or
disable MAC Address Role Mapping.
Default Role Use this pull-down menu to select the
default role for the client when
authenticated. This role is assigned if the
authentication server does not provide role
information.
Authentication Failure
Threshold of Station
Blacklisting
Specifies the number of time a station may
fail authentication before it is placed on a
blacklist and not allowed to authenticate.
Enter 0 to disable blacklisting.
Authentication Servers Use the Add button to create ordered list
of authentication servers.