Specifications

Command Line Basics 13
CHAPTER 3
Command Line Basics
The Command Line Interface (CLI) is the most direct and
comprehensive method for managing the Alcatel Wireless LAN
Switch. The CLI can be used to gather information about the
switch configuration, collect switch performance statistics, and
make configuration changes.
The CLI uses a simple, text-based interface with a Cisco-like
command structure. The format is compatible with standard
terminals and PC terminal emulation software, and can be
accessed locally or over the network using Telnet.
Connecting to the Switch
Local Serial Console
The CLI is always available using a local terminal or a computer
running terminal emulation software. Attach your terminal directly
to the serial port on the supervisor card and set the terminal to
use the following communications setting:
Press <Enter> a few times.to establish the connection and access
the login prompt.
N
OTE—The serial port accepts an RS-232 serial cable with an
RJ-45 male connector (see the Alcatel 6000 Installation Guide
for more port and cable specifications).
TABLE 3-1 Console Terminal Settings
Baud Rate Data Bits Parity Stop Bits Flow Control
9600 8 None 1 None