Specifications

OmniAccess Reference: AOS-W System Reference
322 Part 031652-00 May 2005
policy is useful in blocking access to that AP until the configuration can be
fixed. To configure protection of misconfigured APs, navigate to Configuration >
Wireless LAN Intrusion Detection > Policies > Misconfigured AP
, as shown in
Figure 15-14.
FIGURE 15-14 Misconfigured AP Protection
Configuration parameters are:
Detect Misconfigured Access Points–TBC
Disable Misconfigured Access Points – When valid APs are found that violate
the list of allowable parameters, prevents clients from associating to those
APs using a denial of service attack.
Valid Enterprise 802.11 b/g Channels – Defines the list of valid 802.11b/g
channels that 3
rd
-party APs are allowed to use.
Valid Enterprise 802.11a Channels–Defines the list of valid 802.11a channels
that 3
rd
-party APs are allowed to use.
Enforce Short Preamble as invalid AP configuration–TBC
Prevent valid clients from roaming to interfering APs – If a valid enterprise
client attempts to associate with an AP classified as “interfering”, the system
will break the association using a denial of service attack.