Specifications

OmniAccess Reference: AOS-W System Reference
300 Part 031652-00 May 2005
Frame Error Rate High Watermark – If the frame error rate, as a percentage of
total frames, in an AP exceeds this value, a frame error rate exceeded condition
exists. The recommended value is 16%.
Frame Error Rate Low Watermark – After a frame error rate exceeded
condition exists, the condition will persist until the frame error rate drops
below this value. The recommended value is 8%.
Frame Fragmentation Rate High Watermark – If the frame fragmentation
rate, as a percentage of total frames, in an AP exceeds this value, a frame
fragmentation rate exceeded condition exists. The recommended value is 16%.
Frame Fragmentation Rate Low Watermark – After a frame fragmentation
rate exceeded condition exists, the condition will persist until the frame
fragmentation rate drops below this value. The recommended value is 8%.
Frame Low Speed Rate High Watermark – If the rate of low-speed frames, as
a percentage of total frames, in an AP exceeds this value, a low-speed rate
exceeded condition exists. This could indicate a coverage hole. The
recommended value is 16%.
Frame Low Speed Rate Low Watermark – After a low-speed rate exceeded
condition exists, the condition will persist until the percentage of low-speed
frames drops below this value. The recommended value is 8%.
Frame Non-Unicast Rate High Watermark – If the non-unicast rate, as a
percentage of total frames, in an AP exceeds this value, a non-unicast rate
exceeded condition exists. The default value for this parameter is 0, indicating
that it is disabled. This value largely depends on applications used on the
network.
Frame Non-Unicast Rate Low Watermark – After a non-unicast rate
exceeded condition exists, the condition will persist until the non-unicast rate
drops below this value. The default value for this parameter is 0, indicating that
it is disabled.
Frame Receive Error Rate High Watermark – If the frame receive error rate,
as a percentage of total frames, in an AP exceeds this value, a frame receive
error rate exceeded condition exists. The recommended value is 16%.
Frame Receive Error Rate Low Watermark – After a frame receive error rate
exceeded condition exists, the condition will persist until the frame receive
error rate drops below this value. The recommended value is 8%
Frame Retry Rate High Watermark – If the frame retry rate, as a percentage
of total frames, in an AP exceeds this value, a frame retry rate exceeded
condition exists. The recommended value is 16%.