Specifications

Radio Resource Management 299
Chapter 14
FIGURE 14-9 Event Threshold Configuration
To disable detection for any parameter, set the value to 0. Available
parameters are:
Bandwidth Rate High Watermark – If bandwidth in an AP exceeds this value,
a bandwidth exceeded condition exists. The value represents percentage of
maximum for a given radio. For 802.11b, the theoretical maximum bandwidth
is 7 Mbps. For 802.11a and g, the theoretical maximum is 30 Mbps. The
recommended value is 85%.
Bandwidth Rate Low Watermark – After a bandwidth exceeded condition
exists, the condition will persist until bandwidth drops below this value. The
recommended value is 70%.