Specifications

OmniAccess Reference: AOS-W System Reference
298 Part 031652-00 May 2005
wms
global-policy detect-interference disable
global-policy interference-inc-threshold 100
global-policy interference-inc-timeout 30
global-policy interference-wait-time 30
Event Threshold Configuration
AOS-W provides the ability to configure event thresholds to notify the
administrator when certain RF parameters are exceeded. These events can
signal excessive load on the network, excessive interference, or faulty
equipment. Configure event thresholds by navigating to
Configuration > RF
Management > Monitoring > Event Thresholds
as shown in the figure below.
Events generated by these thresholds being exceeded are found in the system
event log under the Events heading in the GUI.
NOTE—Every environment is different, and administrators should plan to tune
these parameters for optimal monitoring. Alcatel provides recommended val-
ues for these parameters for an average environment. If these thresholds are
too high or too low, it could lead to too many false alarms or could lead to
error conditions being missed.