Specifications

Radio Resource Management 291
Chapter 14
FIGURE 14-3 Calibration Results
The equivalent CLI command to perform calibration is “site-survey calibrate”.
Optimization
Self-Healing
After calibration has taken place, the Alcatel switch has an RF-based topology
map of the entire wireless network. This allows the switch to understand
which APs are within range of each other. In the event that an AP fails,
surrounding APs will increase their transmit power level to fill in any gaps.
Self-healing is enabled by default, and can be configured in the GUI by
navigating to
Configuration > RF Management > Optimization > Self Healing.
FIGURE 14-4 Self Healing Configuration
It is typically not necessary to adjust these parameters. The available
parameters are: