Specifications

Wireless LAN Configuration 283
Chapter 13
deny Deny wireless access according to timerange
argument
deny-bcast enable to suppress responses to probe requests
with broadcast SSID
disable disable this feature or mode
dns-name DNS Name for the AP. Can contain a $L substring
that is replaced with the location of the AP
double-encrypt Encrypt 802.11 data frames using IPSec
dtim-period Interval between sending DTIMs in beacon
dump-server Core dump server (for debugging)
enable enable this feature or mode
essid ESSID for the AP. Should be a string of max. 32
characters
hide-ssid enable or disable hiding the SSID in beacons
hostname Change the system name
lms-ip The IP addr of the LMS that should be assigned
to APs
at this location
local-probe-response The AP (not the switch) generates probe response
max-clients Max Wireless CLients for AP. 0 thru 256
max-retries Maximum number of retries allowed for AP to send
a packet
max-tx-fail Maximum transmit failures before client gives up
mode One of am_mode or ap_mode (air monitor or access
point)
mtu The MTU on the wired link for the AP (1024-1576
bytes)
no Delete Command
opmode Can be a comma separated list of
opensystem,staticWep,dynamicWep,staticTkip,dy
namicTkip,wpa2-aes,wpa2-aes-psk
phy-type Specify either .a or .g for physical layer type,
or enet1 for ethernet port 1
power-mgmt 'enable': Enable power management
radio-off-threshold Number of heartbeat misses before radio is
turned off
restore-default Restore default configs for this location
rf-band The RF Band that the AP should operate in
(g=2.4GHz, a=5GHz)
rts-threshhold The RTS threshold. Packets bigger than this use
RTS and CTS
snmp-server Enable SNMP; Modify SNMP parameters
syscontact Change the system contact
syslocation Change the system location