Specifications

OmniAccess Reference: AOS-W System Reference
274 Part 031652-00 May 2005
FIGURE 13-1 SSID Configuration
The first SSID configured is primary and can be edited, but cannot be deleted.
Other SSIDs can be edited or deleted.
N
OTE—Note: These parameters affect all APs in the network, unless a more
specific configuration applies. Configuration in this section corresponds to
the CLI configuration for “ap location 0.0.0”.
Adding a New SSID
To add a new SSID, click the Add button. The figure below will be displayed.
FIGURE 13-2 Add SSID
Available parameters are:
SSID – Fill in the name of the ESSID. Clients will use this ESSID to associate to
the correct network.