Specifications

OmniAccess Reference: AOS-W System Reference

260 Part 031652-00 May 2005

NOTE—The console will revert to the immediate (non-privileged mode) when

you change the system name. You will need to re-execute the enable and

configure terminal commands before you can proceed.

Create a System Contact entry using the syscontact <name> command.

Create a System Location entry using the syslocation <location> command.

Create a Read Community String entry using

Configuring Trap Receivers

Define a SNMP Trap Receiver using the snmp-server host <IPaddr> version <1| 2c|

3> <CommunityString> command.

Configuring SNMPv3 Users

To configure SNMP version 3 users, navigate to Configuration > Management

SNMP Configuration

(UrsaMinor) (config) #syscontact AniceGuy

(UrsaMinor) (config) #

(UrsaMinor) (config) #syslocation Server_Room

(UrsaMinor) (config) #

(UrsaMinor) (config) #snmp-server community Security

(UrsaMinor) (config) #

(UrsaMinor) (config) #snmp-server host 191.168.1.1 version 2c security

(UrsaMinor) (config) #