Specifications

Switch Management Configuration 259
Chapter 12
Click
Add in the Trap Receivers section of the SNMP page.
The Add Host page appears on the screen.
Enter the IP address of the SNMP server host in the IP Address field.
Chose the appropriate SNMP version from the Version pull-down menu.
Enter a valid SNMP Community String in the SNMP community String field.
Enter the UDP port for the trap in the UDP Port field.
SNMP Configuration Using The CLI
SNMP configuration commands must be executed from the config prompt in
the privileged mode.
Entering SNMP system information
Use the following CLI commands to configure and store SNMP system
information.
Create a system name entry using the hostname <name> command.
(Alcatel6000) (config) #hostname UrsaMinor
(UrsaMinor) >
(Note that you are now in the immediate mode.)
2
3
4
5
6
1