Specifications

OmniAccess Reference: AOS-W System Reference
208 Part 031652-00 May 2005
show dot1x ap-table
The show dot1x ap-table command and its variants display information about
access points connected to the switch.
When the show dot1x ap-table command is executed the systems displays a
screen similar to the one below.
show dot1x ap-table list-aps
[static-wep|dynamic-wep|tkip]
Options:
show dot1x supplicant-info list-all
The show dot1x supplicant-info list all command displays details about the
supplicants associated with the switch.
When this command is executed the system returns a screen containing a table
the includes the following information about each of the supplicants.
z MAC Address of the supplicant
(Alcatel) #show dot1x ap-table list-aps
AP Table
--------
MAC IP Essid Enabled Type Location Vlan Enc
--- -- ----- ------- ---- -------- ---- ---
00:30:f1:71:94:08 10.3.25.253 Alcatel Yes SAP 1.2.3 1
Static-TKIP
00:30:f1:71:94:08 10.3.25.253 guest Yes SAP 1.2.3 7 Static WEP
00:0b:86:80:24:10 10.3.8.191 alpha No SAP 1.1.1 1 Dynamic WEP
static-wep Displays the static wep keys of all the APs. The
information includes:
z AP MAC Address
z WEP Key and Size for each of the four keys.
dynamic wep Displays the dynamic wep keys of all the APs. The
information includes:
z AP MAC Address
z WEP Key, Size, and Slot for the two keys.
tkip Displays the tkip keys for all APs.