Specifications

802.1x Configuration 207
Chapter 10
802.1x Show Commands
This sections describes the show commands applicable to 802.1x.
show dot1x config
The show dot1x config command displays the current values the 802.1x
authenticator’s parameters.
When the command is executed the system will display a screen similar to the
one below.
(OmniAccess 6000) #show dot1x config
Authentication Server Timeout: 30 Seconds
Client Response Timeout: 30 Seconds
Fail Timeout: 30 Seconds
Client Retry Count: 3
Server Retry Count: 2
Key Retry Count: 1
Reauthentication: Disabled
Reauthentication Time Interval: 86400 Seconds
Multicast Key Rotation: Disabled
Multicast Key Rotation Time Interval: 1800 Seconds
Unicast Key Rotation: Disabled
Unicast Key Rotation Time Interval: 900 Seconds
Countermeasure: Disabled
Wired Clients: Enabled
Enforce Machine Authentication: Disabled
Machine Auth Cache Timeout: 24 Hours
Machine Auth Default Role: guest
User Auth Default Role: guest
WPA Key Retry Count: 3
WPA Key Timeout: 1
Ignore EAPOL-Start after Authentication: Disabled
(OmniAccess 6000) #