Specifications

802.1x Configuration 203
Chapter 10
Verify that the authorization server and default roles were correctly assigned.
Ty p e show aaa dot1x <Enter>. The system will display a screen similar to this:
You may also view the rights that are assigned to the user (TestEmployee)
Ty p e show rights TestEmployee <Enter>.
The system will display a screen similar to this:
4
(Alcatel) (config) #show aaa dot1x
Mode = 'Enabled'
Default Role = 'TestEmployee'
Auth Server List
----------------
Pri Name Type Status Inservice Applied
--- ---- ---- ------ --------- -------
1 IAS RADIUS Enabled Yes 1
(Alcatel) (config) #show rights TestEmployee
Derived Role = 'TestEmployee'
Bandwidth = No Limit
Session ACL count = 1
Session ACL List = TestEmpl-acl
ACL = 19
TestEmpl-acl
------------
Priority Source Destination Service Action Opcode TimeRange Log Expired Queue
-------- ------ ----------- ------- ------ ------ --------- --- ------- -----
1 any any any permit Low
Expired Policies (due to time constraints) = 0