Specifications

OmniAccess Reference: AOS-W System Reference
202 Part 031652-00 May 2005
Specify any for the source, destination, and port parameters and permit for the
action parameter.
Ty p e any any any permit <Enter>
Create a User Role
In this example we will create a user role and apply the session-acl
TestEmpl-acl to that role.
Create a user role named TestEmployee.
Ty p e user-role TestEmployee <Enter>
The system will display a screen similar to this:
Associate (assign) the session-acl, TestEmpl-acl, created in the steps above.
Ty p e session-acl TestEmpl-acl <Enter>
The system will display a screen similar to this:
Ty p e exit<Enter> to exit the config-role mode.
Assign the TestEmployee role as the default role for all users authenticated
using 802.1X
Ty p e aaa dot1x default-role TestEmployee <Enter>
The system will display a screen similar to this:
(Alcatel) (config) #user-role TestEmployee
(Alcatel) (config-role) #
(Alcatel) (config) #user-role TestEmployee
(Alcatel) (config-role) #session-acl TestEmpl-acl
(Alcatel) (config-role) #
(Alcatel) (config) #user-role TestEmployee
(Alcatel) (config-role) #session-acl TestEmpl-acl
(Alcatel) (config-role) #exit
(Alcatel) (config) #
(Alcatel) (config) #aaa dot1x default-role TestEmployee
(Alcatel) (config) #
6
1
2
3