Specifications

OmniAccess Reference: AOS-W System Reference

200 Part 031652-00 May 2005

Assigning a Server to 802.1x Authentication

Each instance of a RADIUS server, as created above, must be explicitly

assigned as an authentication server.

Verify that the server you created above is enabled as a do1x authentication

server and that it is assigned the correct priority.

Ty p e show aaa dot1x <Enter>.

The system will display a screen similar to this:

The order in which servers are queried is determined by their priority. The

server with the highest priority (priority = 1) is queried first.

If the priority of the server is too low, change the priority with the aaa dot1x

auth-server command.

Ty p e aaa dot1x auth-server <server name> <priority> <number> <Enter>.

Mode = 'Enabled'

Default Role = 'employee'

Auth Server List

----------------

Pri Name Type Status Inservice Applied

--- ---- ---- ------ --------- -------

1 Alcatel2 RADIUS Enabled Yes 1