Specifications

802.1x Configuration 199
Chapter 10
Enter Configuration commands, one per line. End with CNTL Z.
N
OTE—The command reference for this action may be found in “RADIUS Com-
mands” on page 830.
# aaa radius-server < name of RADIUS server > <acctport portnumber >...<mode enable|disable >
<Enter>
The parameters and defaults for this command are:
Verify that the radius server was created. RADIUS server is created with the
default values, unless otherwise specified.
Ty p e show aaa radius-server <Enter>
A list of authorization servers and their parameters will be displayed.
acctport Port number used for accounting default = 1813
authport Port number used for authentication default = 1812
host The IP address of the RADIUS server. default = 0.0.0.0
inservice Bring server in service immediately. default = Y
key Shared secret text string default =
“changeme”
mode Enable or Disable as an authentication server default = disabled
retransm
it
Maximum times a RADIUS request is retried default = 3
timeout Specify time period between RADIUS
requests.
default = 10
6
7
Auth Server List
----------------
Pri Host IP addr Port Acct Retries Timeout Secret Status Inservice
--- ---- ------- ---- ---- ------- ------- ------ ------ -----
1 IAS 10.1.1.214 1812 1813 3 5 tamales Enabled Yes