Specifications

OmniAccess Reference: AOS-W System Reference
190 Part 031652-00 May 2005
The figure below shows a sample VRRP configuration. In this example, the
switch has an IP address of 172.16.4.254 configured on VLAN 4. The other
switch in the redundant pair also has VLAN 4 configured, with an IP address of
172.16.4.253. The Virtual IP address managed by VRRP is 172.16.4.252.
FIGURE 9-17 VRRP Configuration
The equivalent CLI configuration is shown below:
vrrp 1
priority 1
authentication Floor2
ip address 172.16.4.252
description "Floor 2 Switch1"
vlan 4
no shutdown
Dual Supervisor Card (Virtual Switch) Operation
The Alcatel OmniAccess 6000 Switch supports dual Supervisor Cards. This
allows the OmniAccess 6000 to operate as a Wireless LAN switch as well as a
virtual switch. (As a virtual switch, it must be configured as a local switch
pointing to a master switch.)
To operate the OmniAccess 6000 as a virtual switch:
1. Install the Supervisor Cards (SC) in the OmniAccess 6000.
Use SC revisions 2.2 (build 8037) or higher.