Specifications

OmniAccess Reference: AOS-W System Reference
182 Part 031652-00 May 2005
FIGURE 9-9 Port Selection Options
Ports may be selected based on their administrative state, operational state,
port mode, VLAN association, or trusted state. To select ports based on one of
these parameters, click on the appropriate radio button, then select the desired
state from the drop-down menu. Ports selected in this way will be shown in
the Port Selection section with an X.
Port Selection
To select ports manually, click on the appropriate port(s) in the Port Selection
section. Positioning the mouse over each port will show the current status for
that port in the Configuration Details section. Multiple ports may be selected
for configuration by clicking on each port once.
FIGURE 9-10 Port Selection