Specifications

Basic Switch Configuration 181
Chapter 9
FIGURE 9-8 NTP Configuration
The equivalent CLI configuration for the example above is:
ntp server 172.16.1.25
NOTE—Do not change the time after you have started NTP. NTP will take care
of any time adjustments automatically. If you manually adjust the time more
than 1024 seconds, NTP will fail because it cannot adjust for time discrep-
ancies of this size or large.
Port Configuration
To configure physical ports on the Alcatel switch, navigate to Configuration >
Switch > Port.
Port Selection Options
Ports must be selected before they can be configured. Two methods for port
selection exist. Using the first method, ports may be selected using broad
categories as shown in the figure below.