Specifications

OmniAccess Reference: AOS-W System Reference
180 Part 031652-00 May 2005
Setting the 802.11d Regulatory Domain
The 802.11d regulatory domain controls which channels and power levels may
be used by a radio. The regulatory domain is set at the time of installation
using the initial setup dialog. To view the regulatory domain from the GUI,
navigate to
Configuration > Switch > General.
FIGURE 9-6 Regulatory Domain
Configuring Time Zones
To set the local time zone for the switch location, complete the Time Zone
information as shown below.
FIGURE 9-7 Setting Time Zone Information
Configuring NTP Servers
NTP (Network Time Protocol) is used to synchronize network devices to a
central time source. Configure the switch to set its system clock using NTP by
adding one or more NTP servers under ConfigurationÆSwitchÆGeneral as
shown in the figure below.