Specifications

Basic Switch Configuration 179
Chapter 9
navigate to
Configuration > Switch > General and specify them in the MUX
VLANs section. In the example below, the MUX Server is configured to
terminate VLANs 22 and 23 from remote MUXes.
FIGURE 9-5 MUX Server Configuration
To configure Wi-Fi MUX operations using the CLI, the corresponding
commands are as follows. Please see the CLI Command Reference Guide for
more details on these commands.
MUX CLI Commands
interface fastethernet 1/7
switchport mode trunk
switchport trunk native vlan 22
switchport trunk allowed vlan 22-23
muxport
!
mux-address 172.16.1.102
MUX Server CLI Commands
mux-vlan 22
mux-vlan 23