Specifications

OmniAccess Reference: AOS-W System Reference

170 Part 031652-00 May 2005

Configure the Authentication attributes.

NOTE—To configure settings on the Authentication tab, you must be a member

of the local Administrators group.

In the Wireless network properties window, select the Authentication tab and

set the following properties:

z Enable IEEE 802.1x authentication for the network: Check this box to

enable 802.1x authentication.

z EAP type: Select Protected EAP (PEAP).

NOTE—EAP-TLS is not currently supported using the Cisco ACU.

z Uncheck the other two authentication boxes.