Specifications

OmniAccess Reference: AOS-W System Reference

164 Part 031652-00 May 2005

On the General properties tab, set the Startup type to Auto-

matic.

If necessary, start the service by clicking on the Start button.

NOTE—If the service is already running, the Start button may not be available.

Configure the Cisco ACU

The Cisco ACU must be configured to use Host-Based EAP in order to support

Cisco-PEAP. Use the following procedure to create a profile with Host-Based

EAP. In this example, we will create a profile named Office and associate it

with an AP whose SSID is My-AP.

Launch the Cisco ACU.

Add a new profile.

Click on Add profile and provide the profile name (Office in this example).