Specifications

OmniAccess Reference: AOS-W System Reference
158 Part 031652-00 May 2005
For EAP-PEAP authentication, set the following:
z Enable Fast Reconnect: This enables wireless clients to ROAM between
wireless access points on the same network without being re-authenti-
cated each time they associate with the new access point. To enable fast
reconnect (recommended), check this box.
z Select Authentication Method: Set as Secured Password - (EAP-MSCHAP
V2) and click on the Configure button. The following properties window
will be displayed:
Check the box if you want to automatically use the Windows logon name and
password as your user credentials. Otherwise, you will have to enter the user
credentials manually. If you check this box make sure your windows name and
password are the user credentials configured on the Authentication Server
(e.g., IAS).
Validate the User Credentials
After the Wireless connection is configured, the station will try to associate
with the configured AP. If the 802.11 association is successful, the system will
attempt to validate the user credentials. If this is configured to be done
manually, the following message appears above the Windows system tray:
This informs you that a certificate or other credentials are required to access
the network. Click on the message to open the user credentials entry window.
Specify your user credentials and click on the OK button.