Specifications

OmniAccess Reference: AOS-W System Reference

156 Part 031652-00 May 2005

Configure the Authentication attributes.

NOTE—To configure settings on the Authentication tab, you must be a member

of the local Administrators group.

In the Wireless network properties window, select the Authentication tab and

set the following properties:

z Enable IEEE 802.1x authentication for the network: Check this box to

enable 802.1x authentication.

z EAP type: This setting depends on the type of authentication required.

z If using EAP-PEAP, select Protected EAP (PEAP).

z If using EAP-TLS, select Smart Card or Other Certificate.

z Uncheck the other two authentication boxes.