Specifications

OmniAccess Reference: AOS-W System Reference
148 Part 031652-00 May 2005
In the capture window, the absolute time stamps that are displayed corre-
spond to the time that the packet was received by the client station. This time
is not synchronized in any manner with the time on the Air Monitor.
Stopping Packet Capture
The AiroPeek application cannot be used to start or stop the flow packets
coming from the Alcatel Air Monitors. To stop the packet capture, use the
switch Web Interface or the following CLI command:
pcap stop <AM IP address> <pcap ID> [bssid <radio BSSID>]
The pcap ID can be found using the show pcap status command to list active
packet captures.
Remediation with Sygate
AOS-W 2.4 users who rely on Sygate Technologies for firewall and virus
scanning protection need to install the XML 4 Active X Control file
(MSXML-install.zip) which can be obtained on the Alcatel support website. The
file is in the Tech Tips directory under Support Bulletins.
Responding to error message:
MS XML4 Active X Control is not installed on this machine.
If you are using Windows XP Service Pack 2, and there is a warning box above,
click on it, then choose “Install”. Once installation is done, click here to
proceed.
Click the link and following the installation instructions.