Specifications

Air Management 139
Chapter 7
z Valid channel list for 802.11a channels:
z Valid channel list for 802.11b channels:
z SSID list:
Enabling the Policy
Once the VAP configuration attributes are defined, the policy can be
configured as follows:
Protect Multi-Tenancy Channel Split
The administrator can configure a set of reserved wireless communication
channels for which their network has exclusive access. If an AM detects an
IAP on a reserved channel and this policy is enabled, the AM will perform
denial of service against the IAP.
Specify Reserved Channels
The following command can be used to reserved channels:
z For 802.11a channels:
z For 802.11b channels:
1.When entered as a command parameter, Organizationally Unique Identifiers
(OUIs) must use the following hexadecimal format:
xx:yy:zz:ff:ff:ff
where xx:yy:zz is the organization ID, and ff:ff:ff is the required mask. For
example:
00:0b:86:ff:ff:ff
(Alcatel) (wms) # valid-11a-channel <channel> mode { enable | disable }
(Alcatel) (wms) # valid-11b-channel <channel> mode { enable | disable }
(Alcatel) (wms) # valid-ssid <SSID> mode { enable | disable }
(Alcatel) (wms) # ap-policy protect-misconfigured-ap { enable | disable }
(Alcatel) (wms) # reserved-11a-channel <channel> mode
{ enable | disable }
(Alcatel) (wms) # reserved-11b-channel <channel> mode
{ enable | disable }