Specifications

Common Tasks 131
Chapter 6
Verify that the new image is loaded.
Use the following command to check the memory partitions:
In this example, the new image can be seen in partition 1.
Reboot the switch.
If there are any unsaved changes, the switch will prompt you about saving the
changes.
(Alcatel) # show image version
----------------------------------
Partition : 0:0 (/dev/hda1)
Software Version : 1.0.0.0
Build number : 1654
Built on : Tue Apr 15 04:52:19 PDT 2003
----------------------------------
Partition : 0:1 (/dev/hda2) **Default boot**
Software Version : 1.5.0.0
Build number : 412
Built on : Tue May 15 08:01:24 PDT 2003
----------------------------------
Partition : 1:0 (/dev/hdc1)
Not plugged in.
----------------------------------
Partition : 1:1 (/dev/hdc2)
Not plugged in.
(Alcatel) #
reload
Do you really want to reset the system(y/n): y
System will now restart!
6
7