Specifications

OmniAccess Reference: AOS-W System Reference
130 Part 031652-00 May 2005
Use the following command to check the memory partitions:
In this example, partition 0 contains the active image and partition 1 is empty.
To protect the active image, in the following steps we will load the new image
into partition 1.
Load the new image into the Alcatel Wireless LAN Switch.
Use the copy command to place the image file into the switch:
copy tftp: <server address> <image filename> system: partition{0|1}
For example:
(Alcatel) # show image version
----------------------------------
Partition : 0:0 (/dev/hda1) **Default boot**
Software Version : 1.0.0.0
Build number : 1654
Built on : Tue Apr 15 04:52:19 PDT 2003
----------------------------------
Partition : 0:1 (/dev/hda2)
/dev/hda2: Image not present
----------------------------------
Partition : 1:0 (/dev/hdc1)
Not plugged in.
----------------------------------
Partition : 1:1 (/dev/hdc2)
Not plugged in.
(Alcatel) # copy tftp: 10.1.1.234 OmniAccess 6000_2.0.6.0 system:
partition1
Upgrading partition1
............................................................
Copied image successfully.
The system will boot from partition1 during the next reboot.
5